Archive for September, 2016

Better to Be Safe Than Sorry. Precautions to Take With Frozen Pipes

September 29, 2016Frozen PipesLeave a comment

Being equipped and well-versed will with plumbing and pipe issues will help you to avoid the messy and often expensive issue of frozen pipes. There are ways around how to prevent water pipes in your home from freezing, and how to thaw them if they do freeze.

Why exactly is pipe freezing a Problem? Well water has an exclusive asset in that it enlarges as it freezes. This development puts a great amount of pressure on whatever is surrounding it, including metal or plastic pipes. No matter the “power” of a container, mounting water can cause pipes to burst. Pipes that freeze most regularly are those that are exposed to relentless cold, for example outdoor hose bibs, swimming pool supply lines, water sprinkler lines, and water supply pipes in unheated interior areas like basements and crawl spaces, attics, garages, or kitchen cabinets. Pipes that run against exterior walls that have little or no insulation are also inclined to freezing.

If you want to prevent frozen pipes, ahead of the onset of cold weather, prevent freezing of water supply lines and pipes by following these suggestions:

Drain water from swimming pool and water sprinkler supply lines following the company or installer’s directions. Do not put antifreeze in these lines unless you’re told to do so. Antifreeze is environmentally detrimental, and is dangerous to humans, pets and landscaping.

Remove, drain, and store hoses that are used outdoors. Secure inside valves supplying outdoor hose bibs. Open the outside hose bibs to allow water to drain. Keep the outside valve open so that any water remaining in the pipe can expand without causing the pipe to break.

It is crucial that you check around your home for other areas where water supply lines are located in unheated areas. Look in the basement, crawl space, attic, garage, and under your kitchen and bathroom cabinets. Both hot and cold water pipes in these areas should be protected from cold weather.

Consider installing specific products made to insulate water pipes like a “pipe sleeve” Newspaper can provide some degree of insulation and protection to exposed pipes.

During cold weather, take preventative acts. Keep garage doors closed if there are water supply lines in the garage. Open kitchen and bathroom cabinet doors to allow warmer air to circulate around the plumbing. Be sure to move any harmful cleaners and household chemicals up out of the reach of children.

When the weather is very cold outside, let the cold-water drip from the faucet served by exposed pipes. Running water through the pipe – even at a trickle – helps prevent pipes from freezing.

Keep the thermostat set to the same temperature both during the day and at night. By temporarily suspending the use of lower nighttime temperatures, you may sustain a higher heating bill, but you can prevent a much more costly repair job if pipes freeze and burst. If you’re planning to travel outside the country during the winter time, leave the heat on in your home, set to a temperature no lower than 55° F.

It is important to know how to thaw frozen pipes. If you turn on a faucet and only a trickle comes out, suspect a frozen pipe. Likely places for frozen pipes include against exterior walls or where your water service enters your home through the foundation.

Keep the faucet open. As you treat the frozen pipe and the frozen area begins to melt, water will begin to flow through the frozen area. Running water through the pipe will help melt ice in the pipe.

Apply heat to the section of pipe using an electric heating pad wrapped around the pipe, an electric hair dryer, a portable space heater (kept away from flammable materials), or by wrapping pipes with towels soaked in hot water. Do not use a blowtorch, kerosene or propane heater, charcoal stove, or other open flame device.

Apply heat until full water pressure is restored. If you are unable to locate the frozen area, if the frozen area is not accessible, or if you cannot thaw the pipe, call Anta Plumbing.
Looking for future protection? Consider relocating exposed pipes to provide increased protection from freezing. Add insulation to attics, basements and crawl spaces. Insulation will maintain higher temperatures in these areas.

Do you want to know deep down what happens with water damage? Well ACR has the statistics for you.

– Water damage is one of the highest filed claims in the U.S.
– 37% of homeowners have filed water damage through of their insurance company
– 250 gallons of water leak from a 1/8 inch crack in a pipe daily
– 93% of water damage is preventable had precautions been taken
– The standard residential insurance claim for damage from a pipe breaking is over $100,000

Google+

Twitter

Facebook

Got A Pool? Get Ready To Winterize It!

September 26, 2016WinterizationLeave a comment

For all of you who own pools out there, you’ll know unfortunately that summer has come to an end, which means it is time to close up the pool for the winter time. Want some tips on how to get your pool ready for the winter? I’d be glad to share especially as we are apparently getting a very cold and snowy winter coming up.

The obvious, but first step is to clean out the pool. Wipe out any leaves, and or bugs and debris. Utilize your pool vacuum, or simply angle them out with a net. Wipe out the skimmer and the pump wicker container, as well. Clean the tile line with tile line cleaner. Simpler now than next spring, when the filth has had all winter to set.

Try not to let your chemicals damage your pool. Try not to include tablets or a floater that contains chlorine or bromine—they can harm the hardware. On the off chance that you as of now have chlorine or bromine tablets in your feeder, let them run out with the goal that none remain. In case you’re including winterizing chemicals, empty them into a can and afterward into the pool. Some of these chemicals teach you to turn on the pool channel, while you include the chemicals. Ensure you do, particularly on the off chance that you have a vinyl liner pool—you don’t need stains on your liner to harm to your hardware from centralizations of chemicals in the water.

The number one enemy for your pool is freezing. At the point when water solidifies, it extends with tremendous power. The power separates expressways, parts and garden hoses. On the off chance that you are quitting for the day pool for the winter, you ought to dependably avoid potential risk to shield from p harm regardless of where you live—even pool proprietors in the South have educated, to their misgiving, that solidifying temperatures are an ever-show hazard.

To begin the procedure, deplete the water down beneath the skimmer mouth. Try not to empty the pool. The extension of the dirt under the pool as the water in the dirt stops can jack the pool right out of the ground; it needs the heaviness of some water to keep it solidly set up.

Avoid water in the pipes, as it will mean no freeze damage. Unscrew and any snappy detach fittings or unions at your pump and channel framework. A wet-dry shop vacuum or air compressor is perfect for this. Power the air from your pump down the skimmer and through the skimmer funnels.

Cleaning the filter is very, very important. Expel the channel hoses. Shower the cartridge channel components and D.E. (diatomaceous earth) lattices with Filter Cleaner, then flush them clean with a patio nursery hose. For D.E. channels, deplete the channel tanks and leave the discharge valve open. On the off chance that you have a sand channel, clean it by discharging.

Before you put on the spread, you’ll need to introduce a buoyancy gadget in the focal point of the pool. This gadget needn’t be anything extravagant—it can be a “pad” sold at your nearby pool retailer or a truck inner tube. The buoy adjusts the water and ice beyond any doubt to frame on your pool’s spread over the winter. Significantly more essential, it facilitates weight on the pool dividers by permitting winter’s ice to push in on the buoyancy gadget, not outward on the dividers.

The last step is the winter cover. The winter cover is critical for both the pool and the general population around it. It’s more grounded than a late spring spread, both to withstand the heaviness of snow and ice, and to shield individuals or pets from coincidentally falling through the spread into the water. In the event that your spread has any tears, fix them. On the off chance that they’re unrecoverable, supplant the spread. Stretch the spread over the pool, dark side down.

Now it’s time for storage. You’re going to want to put with whatever remains of supplies away for the winter. Store any plunge board and stepping stools in the shed with your pump and channel. Store your jump jolts or step guards in the pump crate. And voila you’re done. Your pool is prepared for winter’s harshness. Your venture is ensured. Furthermore, you’re spring pool opening ought to be a simple stride to another period of swimming delight!

Do a lot of people even have pools? Well Quora sure believes so. There are approximately 8 million residential pools in the US. Of these, about 4.5 million are in ground and 3.5 million are aboveground pools

Google+

Twitter

Facebook

You Shouldn’t Fix What Isn’t Broken, But You Should Check If Your Electric Meter Is Broken

September 22, 2016Electric MeterLeave a comment

At the point when another power charge comes through and appears to be awfully high, it can be an extremely stressing time. A characteristic reaction is to expect that there’s a major issue with the meter. Issues with electric meters aren’t particularly normal, however they do happen. In the event that you have a broken meter, your vitality supplier should deal with it. Be that as it may, before getting on the telephone to them, it’s a smart thought to experience a couple tests to affirm your suspicions. The accompanying strides will build up whether there’s an issue with your meter.

The Most Effective Method To Read Your Meter

The most essential stride in the process is knowing how to peruse your meter accurately. A substantial number of grievances about defective meters are uncovered to just be a failure to peruse the meter. There are three primary sorts of power meter:

Single Rate Meter

A Single Rate Meter is maybe the most effortless to peruse. The screen will show five numbers in highly contrasting and you just read these numbers from left to right while overlooking some other numbers on the showcase. Most Smart Meters are similarly simple to peruse, however you’ll need to make sure you’re perusing the right number (aggregate kWh) – a few units push through a couple of various showcases.

Double Rate Meter

The Dual Rate Meter is particularly famous in the UK. The format of the presentation is like the single rate meter aside from that there are two arrangements of numbers rather than one. This is on account of a double rate meter takes after your power use at both pinnacle and off-pinnacle times – this demonstrates your power tax is charging you a less expensive rate for off-pinnacle vitality.

The top line (generally marked either “night” or ‘low’) demonstrates the measure of the less expensive power you have utilized. The base line (marked “day” or ‘ordinary’) demonstrates the measure of standard-rate power you have utilized. It’s conceivable that you could have an advanced meter that shows stand out arrangement of numbers at once. If so there will be a catch on your meter that will permit you to flip through the rates. Similarly as with the single rate meter, these numbers are perused left to right.

Simple Meter

The third sort of meter is somewhat more unpredictable, and is normally just alluded to as an Analog Meter. These are a more established style that are still found outside numerous homes. These for the most part have five dials, each alluding to a request of size from 10,000 kWh to 1 kWh (some will have an extra dial demonstrating 1/10 kWh for considerably more noteworthy exactness). The dials are perused left to right, noticing the last number that the pointer has passed. With these meters, it records what you see.

Try not to stress over whether the pointer is nearer to the following number. Be that as it may, if the dial is indicating specifically at a number, you ought to underline it. When you have done this for each dial you ought to do a reversal through your rundown and check the underlined numbers. In the event that the dial to one side of an underlined number is indicating somewhere around 9 and 0 you can decrease the underlined number by one. For instance: if an underlined 5 is trailed by a 9, you ought to cross out the 5 and change it to 4, as the perusing for the two is really 49, not 59.

The most effective method to Test Your Meter

Since you know how to peruse your meter, it’s moderately simple to test it. Switch off each and every machine – actually anything that could utilize power – and after that do a reversal to the meter and check if the presentation is as yet moving. On the off chance that’s despite everything it moving and you’re sure that each and every machine is off (unplugged no doubt), that implies there is likely a shortcoming either with your showcase or some place inside the gadgets. Call your vitality supplier and enlighten them concerning the test; they’ll have the capacity to prompt you on the following move.

On the off chance that you take after the procedure above and the showcase stops moving totally you ought to then deliberately switch back on the greater part of your apparatuses and check how they influence the dial. In the event that you turn on a machine and notice the meter moving rapidly, that reasonable demonstrates that there is some kind of deficiency with the apparatus instead of the meter.

Electric meters are an important household infrastructure. And EIA (U.S. Energy Information Administration establishes this, with this statistic. In 2014, U.S. electric utilities had about 58.5 million advanced (smart) metering infrastructure (AMI) installations. About 88% were residential customer installations.

Google+

Twitter

Facebook

The Quest For The Perfect Tissue Paper!

September 20, 2016Tissue PaperLeave a comment

Are you unsatisfied with your tissue paper? Is it rough? Too thin? Not soft enough to your liking? Well we apparently won’t have anymore of that. According to the latest with the tissue paper industry, Canada’s tissue makers are presently much nearer to delivering the ideal paper, because of some new acclaimed research. What would we do without scientists and theories these days? They do all the dirty work and we are the ones that get to enjoy the discoveries. But of course they test them and they should feel proud to deliver the best discoveries to society.

UBC mechanical engineering researchers Srikanth Phani, Kui Pan and Sheldon Green.

A group working with UBC mechanical building teachers Sheldon Green and Srikanth Phani have made what is likely the primary complete scientific model of creping, the crinkling procedure that makes tissue paper delicate and versatile. It may seem a bit silly and ironic, because what we essentially do with toilet paper is throw it out, and sometimes tear it up, we still want that comfort feeling with tissue paper.

The new model gives an altogether better comprehension of the elements of the creping procedure, permitting producers to tailor the procedure to a more noteworthy degree than before, It’s the most precise model of creping to date. Amid tissue make, mash is dried on a substance covered turning drum until it’s 95 percent dry. It’s then pushed off at high speeds by a sharp creping cutting edge, making many tiny folds that give tissue its delicateness, adaptability, tearing resistance and quality.

With the model, makers can better control of the distinctive components – the chemicals, the mash, the creping edge point, the paper rate etc- to deliver the accurate item review they need, from standard grade tissue to ultra-premium washroom rolls. Who doesn’t admire a great tissue? We always see commercials of toilet paper companies claiming they have the softest tissue. It’s a dog eat dog world out there for companies.

A PhD understudy drove numerical investigations with past reproduction models that were static and didn’t consider the speed and effect of the dryer. The quest for the perfect tissue paper is a top sympathy toward the paper business. Dish’s boss, Srikanth Phani, trusts their work can assist paper firms in this mission. Businesses are on a mission for careful and perfect precision of the best toilet paper.

Canada is a solid player in the billion-dollar worldwide business sector for tissue items including lavatory moves, facial tissues, and cleanliness items. This new research can add to the development of that industry. Evidently, there is a business model for everything, and there are always ways to improve, revolve, and reshape items we use today. If things never changed, then we wouldn’t be evolving and that would make life very boring. It would be like staying at the same job forever. You wouldn’t get to experience life in the best possible way you could. In society we are always looking for ways to improve what we already have, even if there isn’t particularly anything wrong with it. Sometimes, it is just to make things more vibrant. But in this case it is to take something that just isn’t quite at its very best and make it better.

Want to know the latest statistics with toilet paper? The Toilet paper encyclopedia has them for you. What other reasons do we use toilet paper besides the main one we all know of?

Nose Care – 61%

Wiping small spills – 17%

Removing makeup – 8%

Cleaning mirrors – 7

Cleaning a child’s hands/face – 3%

To cover the toilet seat, cleaning glasses

Google+

Twitter

Facebook

It’s A Me-A –Mario The Plumber…Why?

September 17, 2016Mario PlumberLeave a comment

In talks with the new Mario game coming to iOS10, the world’s most outstanding handyman is none other than Mario. Our most loved game legend has experienced a greater number of channels than genuine handymen and spared the day a larger number of times than you can tally. However, how did such an unmistakable figure wind up ending up a Plumber? He could have been anything – yet he turned into a handyman. Here’s the means by which everything happened.

At the point when Mario was initially made in 1981, he was called “Jumpman”, and featured as a character alongside the prominent fan top pick – Donkey Kong. The main amusement included Mario to move up a progression of steps and hindrances to safeguard a woman at a development site. Mario’s first occupation was in this way, a craftsman. At the point when studio administrators held a meeting at their central station to choose another name for Jumpman, their proprietor raged in requesting installment. By chance, Jumpman was named Mario, which was likewise the name of the proprietor.

Presently Mario’s reality was intended for the underground. The makers consolidated funnels as a method for transportation, which sort of appeared well and good in light of the fact that in this present reality, the underground are loaded with channels. Mario, who goes through these funnels much of the time all through the amusement, hence got to be known as a handyman. It is fascinating to note that Mario does not use a plunger nor participates in any family unit cleaning. In any case, his outfit and facial components presumably cleared the generalization for an average handyman – full mustache, suspenders, top, and enormous bellied. His outfit and particular components are truth be told, halloween top choices. You can arrange Mario outfit on locales like Amazon and EBay. Trust it or not, there are many mother and pops plumbing organization that influence the name “Mario” to promote for their own particular pipes shops. Impeccably lawful and a shrewd move as well.

Mario’s sibling, Luigi is additionally a handyman by calling. The two are called Mario Bros, and as per their network program, possess a pipes organization. Obviously Nintendo, the organization that claims the establishment, never truly demonstrate the Mario’s Bros take part in any real pipes conceivably because of the gross way of sewage, and additionally thought for their objective demographic.

This makes one wonder, would we truly like to see the Mario Bros unclog a can and introduce water warmer in the following Mario game? Super Mario World of Plumbing beyond any doubt sounds like a diversion each child ought to blessing to their fathers. Tell us what you think in the remark segment beneath.

Mario might be our legend however how about we not overlook the genuine saints of this world – the handymen who keep our roads clean and our homes sterilized and slop free.

Mario actually first appeared as a carpenter in earlier games, but when the construction site he worked on transformed into a land of mushrooms, it was obvious that his carpenter skills were needed no more. Instead, there was a high demand for plumbers. In the games, you can see pipes and mushrooms everywhere. These mushrooms probably started popping up because the pipes weren’t properly fixed by the plumber before Mario. Mario, however, noticed his old profession wasn’t in demand and the world he was living in was in desperate need for a good plumber, thus being why he switched professions. However, we may question how skilled of a plumber Mario is given the large amount of man-eating plants we see erupting from the pipes.

Super Terry showcases games presenting Mario as a plumber. Mario is represented as a plumber in several of the series found in the Mario video game authorization. Some of the more prominent games from these series where Mario is a plumber includes:

Mario Bros.
Super Mario Bros.
Super Mario Sunshine
Super Mario Galaxy
Mario and Luigi: Dream Team

Some extra facts that The Guardian outlines that you probably didn’t know about Super Mario Bros. are: Mario has appeared in over 200 video games, The Super Mario bros series is in the Guinness Book of Records as the most successful gaming franchise of all time. It now boasts global sales of over 240 million units, and since 1995, the voice of Mario has been provided by American voice actor Charles Martinet.

Google+

Twitter

Facebook

Tips to Keep Your Pipes From Playing Tricks This Halloween

September 15, 2016HalloweenLeave a comment

October is coming up and you know what that means? Trick or Treat time. If you like your Halloween frightening but not THAT frightening, then let’s look at some ways you can steer clear of being on the wrong end of a plumbing “Trick or Treat.” Carving pumpkins is a worldwide Halloween custom. Make sure you use your garbage disposal properly, or you’ll end up with a horror show in your kitchen. Be that as it may, this pre-occasion fun can transform into a pipes bad dream if the mash and seeds discover their way down the trash transfer. With the typical increment in blockage of kitchen sink drains and stuck rubbish transfers, handymen see this every October season and know what to expect. People just aren’t well informed with plumbing dangers.

Handymen stay entirely occupied with Halloween season since individuals don’t understand the pumpkin’s stringy, vile substance solidifies and adheres to the funnels. The administration experts are available to come back to work every minute of every day, so they can repair plumbing crises and recover individuals to their Halloween celebrations.

The secret to keeping pumpkin mash and seeds from creating plumbing issues is being wary when expelling and discarding the pumpkin’s remaining parts.

Anta Plumbing has some recommendations that can be very helpful. You’re going to want to cut pumpkins on paper far away from the kitchen sink. You can try not to put mash and seeds into the refuse transfer or can toss all pumpkin-related waste and daily paper in the garbage. For the individuals who reuse, put the leftovers in a manure heap. Also, the treat for tailing this suggestion – pumpkin carvers can utilize the mash and seeds for Halloween pastries, breads and biscuits. There are formulas that utilize both mash and seeds. It is a great way to reuse food and make some tasty treats for the family.

Independent believes we should be saving our pumpkins not wasting them. As a result, 18,000 loads of entirely edible squash is thrown right into the garbage every Halloween season. Do you know how much that weighs? The same as 1,500 double decker buses.

Google+

Twitter

Facebook

Your Pets Deserve The Best and So Does Your Plumbing!

September 13, 2016plumbingLeave a comment

Are you the owner of a pet? Most of the population doesn’t associate plumbing issues with their pets. You probably wouldn’t even consider it a problem when you first purchased your pet. You wouldn’t debate on getting a pet, because you thought it would cause problems for your plumbing. But problems can creep up on you unexpectedly when you share your home with a dog or cat. Several universal pet-related plumbing problems live today. You have seen in the movies when a dog drinks in the toilet or like to splash in the sink or bathtub. While this may this all be fun and games, it not only wastes water but it can put a strain on your pipes. Furthermore, pet hair can clog drains just like human hair, every time your dog or cat gets a bath from its owner-you! To keep your drains and pipes clean with pets around.

As mentioned before, pet hair can clog your drains, so you’re going to want to invest in a drain strainer. If you think that pets don’t shed that much, just because they don’t have as much hair then you’re not the only one. Many pet owners think their pets shed less than they really do. The truth is: all pets shed, and they do so more than we imagine. Large amounts of hair can come off when grooming a pet. A drain strainer can keep all that hair out of your pipes and will make cleaning the tub so effortless. You should own a drain strainer even if you don’t have a pet.

Did you know that puppies and kittens tend to chew on pipes or drains to mature their teeth? In addition, sometimes-small pets get trapped in pipes or drains, especially hamsters. That is probably a pet owners worst nightmare. To avoid these things from happening, purchase drain covers and make sure all uncovered drains are sheltered. You can in addition wrap your pipes to put off your pets chewing or block exposed pipes with furniture. As a pet owner, you want to do what’s best for your pet, be sure to purchase chew toys to keep his or her mouth occupied. It will save you the headache.

Lastly, you want to be weary of what your flushing down the toilet. Never EVER flush your cat’s litter down the toilet. It will harm your plumbing system, that’s for sure. At the minimum, the litter will dirty your pipes, which allows more clogs to expand. DO the right thing and don’t flush pet waste down the toilet. It may seem like the easy solution, but in the long run it’s the wrong decision.

If your unsure how often you should be cleaning out your cats litter box, for those who are new pet owners, Pet Finder has the answer for you. Litter boxes evidently, should be changed at least once or twice a day, and it’s even better if you can get to it as soon as your cat has completed his or her business.

Google+

Twitter

Facebook

Stop The flood Before It Starts: Tips At Your Service

September 12, 2016Basement MaintenanceLeave a comment

Are you afraid of basement floods or do you believe you are at risk for them? Each house is at danger of storm cellar flooding, regardless of the fact that there has never been a flooding occurrence. The uplifting news is that you can anticipate or if nothing else diminishes this event. For both inside and outside your house there are ways to help prevent basement floods so you don’t have to worry. If may require some effort on your part, and you might even have to get someone to help you, but isn’t it better to be safe than sorry? Later on you will have wished you had done this prior to incidents happening. Why have regrets when you can have a happy face instead.

For outside your home here are some great tips that you can you employ for your prized possession aka household. Seal splits or openings in walls, floors, windows and establishments, and seal all windows properly. Clear eavestroughs and downspouts of leaves and waste that avoid appropriate drainage. Make sure your disconnected downspouts are draining properly, ideally two meters from your foundation’s walls. Make sure the grading around your home slopes absent from the foundation wall to help drain water away from your home. You want to do this without negatively interfering with your neighbours yard. Clear waste from roadside catchbasins to help water go into the storm sewer. It is very important that you make sure it is safe to do so. You probably might want to call a plumber if you are afraid to do anything on your own.

What you can do inside your house:

Make sure your plumbing and drainage systems are in good functioning stipulation. Homeowners are accountable for the plumbing from the property line to inside the home. Part of plummeting the risk of basement floods is to recognize how your plumbing and foundation drainage systems work and how to preserve them. Every home is unique and homes over time have been built with different building practices. Call a certified plumber to install a backwater valve and a sump pump. It’s so much easier when a professional knows what they are doing and they don’t have to panic.

Why do basement floods occur in our homes exactly? flooding can take place by seepage or flow through the walls or foundation floor, from surface water sources, or by a sanitary or storm sewer backup. Basements are the lowest levels in our houses and above it is ground water, which is susceptible to entering basements.

Google+

Twitter

Facebook

Plumbing Inspection Will Equal Perfection

September 6, 2016Plumbing InspectionLeave a comment

When it comes to plumbing in homes only one word should come to mind; inspection. It is very important to be attentive of your plumbing system and to inspect it as things happen and it is best to prevent worse things from happening. Here are some plumbing inspecting tips for those who are looking to purchase a home on the market. Here is what Anta Plumbing recommends to be looking out for. Water Leaks in both the joints and shut off valves. In terms of water flow and blockages and rust build up a good thing to do is run two faucets simultaneously and check the water pressure to conclude that the pressure is sufficient. It is important to have proper dielectric union between copper and galvanized steel in order to prevent blockage and rust.

When focusing on a hot water heater you want to take things into consideration. Make sure it is producing hot water of course. Make sure the hot water heater flu has positive air flow to the chimney or the roof. You want to be attentive of a splash sound coming from the hot water heater, this is a sign that the hot water has residue building up at the bottom of the tank and the hot water heater is approaching the end of its functionality. In order to make sure it is properly connected make sure it has three screws per joint.

When it comes to plumbing waste lines there are usually five different types. PVC, galvanized steel, copper, lead and black steel iron. In homes you will find a sewage injector pump; this type of machinery is used as a lift system for your bathroom waste. It should include two waste lines. In order to test to make sure it is working, you can test it by flushing the toilet or running water usually for a few minutes you want to be listening for the pump to engage. If it does then you know it is working properly. You also want to be sure that there is a cover sealed around the pipes. This is required in order to stop sewage gas from escaping.

Guaranteed if you look out for these things when inspecting you shouldn’t have any problems. If you don’t want to inspect it yourself, and you don’t mind spending the cash, because your unfamiliar with plumbing, you can get the checklist ready and hire a plumber to inspect everything for you.

Google+

Twitter

Facebook

Home Improvement 101: Building relationships one house at a time

September 5, 2016Home ImprovementLeave a comment

Our homes; they are our prized possessions. Our parents or we put a lot of money, time and care into them. But of course as time goes on things change, we come faced with unexpected opportunities, where we are forced to move. So what does this mean for our current homes? Time to sell. Of course when people sell their homes they want to sell for the best price they can. If you are thinking of selling your home you may want to consider increasing the value by incorporating these tips.

HGTV can provide you with some great tips that I will go into detail with. Probably one of the easiest ways you can boost the value of your home is by repainting. It changes the overall effect and presence of your home. Maybe you want to liven it up, if you have a boring colour like white. Neutral colour are probably the best way to go, because you don’t want to go too funky with colours keeping in mind you want it to match with furniture and décor.

Cutting energy costs is a tip most people wouldn’t think of. Creating an energy efficient home is important, because it will save you money in the mean time and it will make your home a greater asset on the market. Is your current home lacking landscaping finishes? For example lack of plants and gardening? Interlocking? You should consider sprucing it up. It will make a huge difference in the overall appearance of your home.

Related to the outside of your home keeping up with the maintenance of your lawn is crucial. When you walk or drive by a home and you see the lawn is not cut, is looking yellow, has patches, and lots of dandelions does that look appealing at all to you. Sounds like laziness to me. Obviously increasing the value of your home is going to mean you putting in the time, money, effort and energy. Hiring a lawn company to help maintain your lawn will save you a headache and it won’t cost you too much money.

Probably one of the most obvious things to do that will help make your home sparkle is maintaining its cleanliness. If your having trouble keeping it clean on your home you can consider hiring a cleaning service. Who would even be interested in buying your home if it’s not in tiptop clean shape? Some people are huge clean freaks so this is could be a significant factor in whether someone wants to buy your home or not.

You can easily increase the size of your home by getting rid of old junk in your home that you don’t need that is cluttering everything up. The more space the better. You could try replacing drapes with blinds. Having sunlight seep through your home makes it feel warmer, big and open. Bathrooms in homes probably sometimes get forgotten, because they are the smaller rooms of homes, but that doesn’t mean they don’t matter.

If your bathroom is particularly even smaller it’s probably very important that you consider remodeling it, by possibly putting in a more updated faucet or sink, redoing in the tiling, and simply adding new bathroom accessories like soap dish, or towels. Make it feel welcoming.

HGTV includes much more tips and advice, but the last one I’m going to mention is the kitchen. Probably one of the most important rooms in the house, considering most of the time is spent in there. If someone purchasing your home really enjoys cooking you will probably want to consider updating your appliances. Maybe getting a stainless steel fridge, or changing your cabinets. Making sure to match everything accordingly is important for the overall interior and design.

According to The Big Story, more Americans are or have been remodeling their homes in 2016. News projected that costs on remodeling and repairs has risen 8.6 percent in 2016 to $310 billion. The supplementary costs would probably supply to increase financial growth, which would evidently construct more occupations for construction workers.