in

High-Efficiency Plumbing Fixtures: How You Can Save Energy, Water & Money

It’s no secret that reducing water offers many benefits. Not only does it save you money by reducing your water and energy consumption, but it also protects your community’s water supplies. Since energy is used to heat, treat and deliver water, you also save energy.

Did you know that the average Canadian uses more than 10,000 litres of water per month? Of that:

  • 35% is used for showers and baths
  • 30% is used for flushing the toilet
  • 20% is used for laundry
  • 10% is for the kitchen and drinking
  • and 5% is used for cleaning.

We waste water in many ways…

1. Allowing the tap to run for 5 minutes, wastes 45 litres of water. Turn off the tap while you brush your teeth, and don’t rinse dishes under a running faucet – use a bowl or sink instead.

2. Older toilets use up to 20 litres per flush, while a leaky toilet can waste between 20-40 litres per hour.

3. Running the dishwasher or washing machine for small loads of wastes a lot of water too.

4. While sprinklers use around 950 litres of water, up to 60% of that water will evaporate during the hours of 10:00 AM to 4:00 PM. You can save water by watering your gardens and lawns early in the morning or evening when it’s cooler and less windy.

How High-Efficiency Plumbing Fixtures Can Help Save Water

Low-flow, high-efficiency plumbing fixtures aren’t new to the market. In fact, we now get ultra-low-flow fixtures that save even more water while delivering the same level of performance. These fixtures are up to 20% more water-efficient than standard low-flow fixtures and WaterSense labeled products go through a strict verification process to ensure that they perform as well, or even better than other products.

When it comes to upgrading to high-efficiency plumbing fixtures, it is important to speak to your local Toronto plumber about the thresholds that are applicable, and the installation requirements.

Here’s what you should consider when switching to water-saving fixtures:

High-Efficiency-Toilets
High-Efficiency Toilets: Since the toilet is responsible for about a third of our water consumption, that would be the first place to make changes. If your toilets were installed before 1994, you will have to replace it with a newer high-efficiency, ultra-low-flow toilet, or the very best option – a dual-flush toilet. Dual flush toilets let you choose whether you want a low-flush for liquid waste, or a higher flush for solid waste.

bottle-sand
Plumber Cheap-Fix Tip: Don’t want to install a new toilet? Fill a bottle with sand or pebbles and put it in the cistern. Alternatively, you could purchase a dual-flush conversion kit or retrofit kit to convert your regular toilet to a dual-flush.

showerheads
Ultra-Low-Flow Showerheads: Around 20% of the average household’s water use is used for showers and baths. Install a cost-effective ultra-low-flow showerhead that uses around 18 times less water than the old-fashioned type. Ultra-low-flow showerheads save money on both energy and water, and by saving 300 kilowatt hours of electricity, you can save enough power to power your television for a whole year.

high-efficiency-faucet
High-Efficiency Faucets: You can reduce water use on faucets by installing high-efficiency faucets or by adding flow restrictor or water-saving aerator to your existing faucets.

Going green starts with saving water, a precious resource which is in low supply around the world right now. Do your part by installing high-efficiency plumbing fixtures.

What do you think?

Written by Tanya Klien

Proactive Plumbing Tips to Help You Save Water

What You Should Know About Replacing Your Water Heater